Product ID:W/R ENAMEL, G11507 (0903910)
MSDS Date:03/26/1992
FSC:8010
NIIN:00N056892
MSDS Number: BWLYX

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 800-245-2590

Cage: 4D920

PPG INDUSTRIES INC

ALLISON PARK, PA 15101 US

Telephone: 800-245-2590

Cage: 4D920

1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

ETHANOL, 2-(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: 2-5%

OSHA PEL N/K

ACGIH TLV: N/K

ETHANOL, 2-DIMETHYLAMINO-; (DIMETHYLAMINOETHANOL)

CAS: 108-01-0

RTECS: KK6125000

Fraction By Weight: 1-2%

OSHA PEL N/K

ACGIH TLV: N/K

ETHANOL, 2-BUTOXY-; (ETHYLENE GLYCOL MONOBUTYL ETHER)

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 1-2%

OSHA PEL 50 PPM, S

ACGIH TLV: 25 PPM, S

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 25-30%

OSHA PEL N/K

ACGIH TLV: N/K

CONTENTS CAN BE HARMFUL/FATAL. CHRONIC

RTECS: 9999999ZZ

EFTS ON CNS, HEMATOPOIETIC TISS, BLOOD, KIDNEYS &

RTECS: 9999999ZZ

FROM DHHS (NIOSH) PUBLICATION NO. 90-118) . AVOID

RTECS: 9999999ZZ

DIOXIDE. ANIMALS INHAL MASSIVE QTYS OF TITANIUM

RTECS: 9999999ZZ

STUDIES W/HUMANS INVOLVED IN MFR OF THIS PIGMENT

RTECS: 9999999ZZ

INHAL OF DUSTS FROM COATINGS IS VERY LIMITED. SINCE

RTECS: 9999999ZZ

HAZ FOR MAN. PROD CNTNS DIETHYLENE GLYCOL MONOBUTYL

RTECS: 9999999ZZ

LOW LEVELS BY RATS FOR 30 DAYS CAUSED INJURY TO

RTECS: 9999999ZZ

SERIES GLYCOL ETHER WHICH HAS BEEN SHOWN TO CAUSE

RTECS: 9999999ZZ

FORMING TISSUE. NO CONCLUSIVE EVIDENCE OF THESE

RTECS: 9999999ZZ

CAREFULLY TO DETERM TYPE OF AIRBORNE

RTECS: 9999999ZZ

LEL BELOW STATED LIMIT & TO REMOVE DECOMP PRODS

RTECS: 9999999ZZ

& FULL LENGTH FACESHIELD .

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: HARMFUL/FATAL IF SWALLOWED.
EYES: CAUSES SEV IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL
DISTURB MAY INDICATE EXCESS EYE CNTCT. SKIN: CAUSES PRIMARY IRRIT.
MAY BE HARMFUL IF ABSORBED THRU SKIN. DRYNESS, ITCH, CRACKING,
BURNING, REDNESS & SWELL ARE CNDTNS ASSOC W/EXCESS SKIN CNTCT.
INHAL: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: VAP & SPRAY MIST HARMFUL. VAP IRRIT
EYES, NOSE & THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT
OF RESP SYS & PERM BRAIN & NERVOUS SYS DMG. EYE WATERING, HDCH,
NAUS, DIZZ & LOSS OF COO RDINATION ARE INDICATIONS THAT SOLV LEVELS
ARE TOO HIGH. INTENTIONAL MISUSE BY DELIB CONCENTRATING & INHALING
(ING 9)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 30 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF
INGEST, ANY TYPE OF OVEREXP/SYMPS OF OVEREXP OCCUR DURING/FOLLOWING
USE OF PROD, CNTCT POIS CTL CTR, EMERGENCY ROOM OR MD IMMED. HAVE
MSDS INFO AVAIL.

Flash Point Method:PMCC
Flash Point:212F,100C
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA
(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERS EQUIPPED
W/PROPER RESPIRATORY & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER ABSORB MATL & PLACE INTO CONTAINERS FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
SYSTEM, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIXTURE MAY HAVE HAZARDS OF ALL ITS PARTS.

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CTLS, VAP EXHST OR FRESH AIR ENTRY. NIOSH/MSHA APPRVD
(TC-23C-) AIR PURIFYING OR AIR SUPPLIED (TC-19C-) RESPS MAY ALSO
REDUCE EXPOS. READ RESP MFR'S I NSTRUCTIONS & LITERATURE (ING 19)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS BELOW SUGGESTED EXPOS LIMITS, (ING 20)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS (ING 21)
Other Protective Equipment:WEAR PROT CLTHNG INC IMPERMEABLE APRON.
CLEAN OR DISCARD CONTAM CLTHNG & SHOES. ANSI APP EYEWSH FNTN/DELUGE
SHWR .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA: CLASS IIIB LIQ FIRES. FIRE FIGHT PROC: POSS
AUTOIGNIT/EXPLOS WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED,
FOG NOZZ ARE PREF. HAZ DECOMP PRODS: INCLUDING CARBON MONOXIDE,
OXIDES OF NIT ROGEN, FORMALDEHYDE.

Boiling Pt:B.P. Text:>149F,>65C
Vapor Pres:17.3
Vapor Density:HVR/AIR
Spec Gravity:1.15
Evaporation Rate & Reference:34 (BUOAC=100)
Solubility in Water:53.8%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF CHEM FAMILY & ANY
SOLVS LISTED IN INGREDIENTS.
Percent Volatiles by Volume:62.60

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING/BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMEN T FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.